![background image](/i/infiniti/150938/infiniti-m35-2010/h/infiniti-m35-2010-388.png)
REPLACING
Replace the wiper blades if they are worn.
1. Push the ignition switch to the ON posi-
tion and turn the windshield wiper switch
on. Push the ignition switch to the LOCK
position when the wiper is in the fully up
position. The wiper will stop as illustrated.
The wiper should be in the fully up position to
avoid scratching the engine hood or wiper
arm.
2. Pull the wiper arm.
3. Push the release tab
s
A
, and then move
the wiper blade down the wiper arm
s
1
while pushing the release tab to remove.
4. Insert the new wiper blade onto the wiper
arm until a click sounds.
5. Rotate the wiper blade so the dimple is in
the groove.
CAUTION
●
After wiper blade replacement, return the
wiper arm to its original position;
otherwise it may be damaged when the hood
is opened.
●
Make sure the wiper blades contact the
glass; otherwise the arm may be damaged
from wind pressure.
SDI2185
SDI1649
Maintenance and do-it-yourself
8-23
w
—
—
05/19/09—tbrooks
X