![background image](/i/infiniti/150598/infiniti-m45-2008-m35-2008/h/infiniti-m45-2008-m35-2008-104.png)
3. Adjust the desired amount of the air using
the control knob
s
A
.
The climate controlled seat blower remains
on low speed for approximately 60 seconds
after turning the switch on or selecting the
desired temperature.
4. When the vehicle’s interior is warmed or
cooled, and/or before you leave the ve-
hicle, be sure to turn the control knob to
the OFF position (center). The indicator
light
s
B
on the control knob goes off at
the OFF position.
To check the air filter for the climate con-
trolled seat, contact an INFINITI dealer.
CAUTION
●
The battery could run down if the climate
controlled seat is operated while the engine
is not running.
●
Do not use the climate controlled seat for
extended periods or when no one is using
the seat.
●
Do not put anything on the seat which insu-
lates heat, such as a blanket, cushion, seat
cover, etc. Otherwise, the seat may become
overheated.
●
Do not place anything hard or heavy on the
seat or pierce it with a pin or similar object.
This may result in damage to the climate
controlled seat.
●
Any liquid spilled on the seat should be re-
moved immediately with a dry cloth.
●
The climate controlled seat has an air filter.
Do not operate climate controlled seat with-
out an air filter. This may result in damage to
the system.
●
When cleaning the seat, never use gasoline,
thinner, or any similar materials.
●
If any malfunctions are found or the climate
controlled seat does not operate, turn the
switch off and have the system checked by
an INFINITI dealer.
The Lane Departure Warning (LDW) system will
sound a warning chime and blink the lane
departure warning light
(orange) to alert
the driver if the vehicle is traveling close to
either the left or the right of a traveling lane
with detectable lane markers.
The LDW system activates automatically when
the ignition switch is pushed to the ON posi-
tion. (This is the automatic setting mode.) The
LDW ON indicator
s
1
on the switch will illumi-
nate.
To cancel the LDW system, push the LDW switch
to turn off the system. The LDW ON indicator
s
1
will turn off.
Push the LDW switch again to turn the LDW
system on. The LDW automatic setting mode
SSD0671
LANE DEPARTURE WARNING (LDW) SWITCH
(if so equipped)
2-36
Instruments and controls
w
—
—
10/31/07—debbie
X