11. Specify path C:\SWTOOLS\DRIVERS\MONITOR to this monitor INF. Then, click Open.
12. Click OK.
13. Confirm the correct display type, then click Next.
14. When installation completes, click Close.
15. Click Close to close the Display Properties window.
16. Click OK in the Monitor tab.
17. Click OK and close the Display Settings window.
Installing other drivers and software
The device drivers are provided in the C:\SWTOOLS\DRIVERS directory on your hard disk drive. You will also
need to install application software, which is provided in theC:\SWTOOLS\APPS directory on your hard disk drive.
To do this, refer to the instructions in “Reinstalling preinstalled applications and device drivers” on page 69.
Note: If you cannot find the Supplement files, device drivers, and application software you need on
your hard disk drive, or if you want to receive updates and the latest information about them, go to
http://www.lenovo.com/ThinkPadDrivers.
ThinkPad Setup
Your computer comes with the ThinkPad Setup program to enable you to select various setup parameters.
To start ThinkPad Setup, do the following:
1. Turn on the computer. When the logo screen is displayed, press the F1 key. The ThinkPad Setup
program main menu opens.
Note: If you have set a supervisor password, the ThinkPad Setup program main menu will be displayed
after you enter the password. You can start ThinkPad Setup by pressing Enter instead of entering the
supervisor password. However, you cannot change the parameters that are protected by the supervisor
password. For more information, refer to “Using passwords” on page 53.
2. Using the cursor keys, move to an item you want to change. When the item is highlighted, press
Enter. A submenu is displayed.
3. Change the items you wish to change. To change the value of an item, press the following keys:
• F6 or the combination of Shift and +: Change to a higher value.
• F5 or – : Change to a lower value.
4. Press Esc to exit from the submenu.
5. If you are on a nested submenu, press Esc repeatedly until you reach the ThinkPad Setup program
main menu.
Note: If you need to restore the settings to their original state as of the time of purchase, press F9 to
load the default settings. You also can select an option on the Restart submenu to load the default
settings or discard the changes.
6. Select Restart. Move the cursor to the option you want for restarting your computer; then press Enter.
Your computer restarts.
Main menu
The Main menu is the first interface you see after you enter ThinkPad Setup. It displays the following
configuration of your computer:
• UEFI BIOS Version
• UEFI BIOS Date (Year-Month-Day)
108
User Guide
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
