A9

Control Panel Functions

Use this button to turn the display on or off.

Power Button

Power Indicator

Use this button to enter a selection in the On Screen 
Display.

AUTO/SET
Button

AUTO IMAGE ADJUSTMENT

When adjusting your display settings, always press
the 

AUTO/SET

button before entering the On Screen

Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode).

The best display mode is

- W1942TE : 

1440 x 900

- W2042TE/W2242TE : 

1680 x 1050

Buttons

Use these buttons to select or adjust functions in the
On Screen Display.

For more information, refer to page A16.

Use this button to make D-Sub or DVI connector
active. This feature is used when two computers are
connected to the display. The default setting is D-Sub.

This Indicator lights up as blue when the display is
operating normally(On Mode). If the display is in
Sleep Mode (Energy Saving), this indicator changes
to flicker.

Control Function