NOTE
Information in this document is subject to change without notice.
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
& Weight
Tilt Range
Power Input
Environmental
Conditions
Stand Base
Power cord
TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel
Anti-Glare coating
19 inches visible diagonal (48.1 cm)
0.285*0.285 mm pixel pitch
Horizontal Freq.
Analog : 30 - 83 kHz (Automatic)
Digital : 30 - 83 kHz (Automatic)
Vertical Freq.
56 - 75 Hz (Automatic)
Input Form
Separate TTL, Positive/Negative
SOG (Sync On Green)
Digital (HDCP)
Signal Input
15 pin D-Sub Connector
DVI - D Connector (Digital)
Input Form
RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Max
Analog : VESA 1440 x 900 @ 75 Hz
Digital : VESA 1440 x 900 @ 60 Hz
Recommend
VESA 1440 x 900 @60 Hz
DDC 2B
On Mode
:
20W(Typ.)
Sleep Mode
≤
0.3W(Typ.)
Off Mode
≤
0.3W
With Stand
Without Stand
Width
44.84 cm / 17.65 inches
44.84 cm / 17.65 inches
Height
38.33 cm / 15.09 inches
30.07 cm / 11.84 inches
Depth
19.84 cm / 7.81 inches
6.32 cm / 2.49 inches
Net
4.1 kg (9.11 lbs)
Tilt
-5˚~ 20˚
AC 100-240V~ 50/60Hz 0.8A
Operating Conditions
Temperature
10˚C to 35 ˚C
Humidity
10 % to 80 % non-Condensing
Storage Conditions
Temperature
-20˚C to 60 ˚C
Humidity
5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Wall-outlet type
A20
A20
Specifications
W1942TE
