Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
& Weight
Tilt Range
Power Input
Environmental
Conditions
Stand Base
Power cord
TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel
Anti-Glare coating
22 inches visible diagonal (55.8 cm)
0.282*0.282 mm pixel pitch
Horizontal Freq.
Analog : 30 - 83 kHz (Automatic)
Digital : 30 - 83 kHz (Automatic)
Vertical Freq.
56 - 75 Hz (Automatic)
Input Form
Separate TTL, Positive/Negative
SOG (Sync On Green), Digital (HDCP)
Signal Input
15 pin D-Sub Connector
DVI - D connector (Digital)
Input Form
RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Max
Analog : VESA 1680 x 1050 @60 Hz
Digital : VESA 1680 x 1050 @60 Hz
Recommend
VESA 1680 x 1050 @60 Hz
DDC 2B
On Mode
: 22W(Typ.)
Sleep Mode
≤
0.3W(Typ.)
Off Mode
≤
0.3W
With Stand
Without Stand
Width
51.57 cm / 20.30 inches
51.57 cm / 20.30 inches
Height
41.80 cm / 16.46 inches
34.46 cm / 13.57 inches
Depth
20.94 cm / 8.24 inches
6.31 cm / 2.48 inches
Net
4.65 kg (10.33 lbs)
Tilt
-5˚~ 20˚
AC 100-240V~ 50/60Hz 1.0A
Operating Conditions
Temperature
10˚C to 35 ˚C
Humidity
10 % to 80 % non-Condensing
Storage Conditions
Temperature
-20˚C to 60 ˚C
Humidity
5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Wall-outlet type
A22
Specifications
W2242TE
NOTE
Information in this document is subject to change without notice.
