A7

Using the Computer

1.

Make sure to turn off the computer and  product. Connect the cable as below sketch map
form

to

.

1

2.

Press        button on the front switch panel to turn the 

power on. When monitor power is turned on, the 
'Self Image Setting Function' is executed automatically.

(Only Analog Mode)

2

Connecting the Display

PC

PC

MAC

PUSH

c

B

A

Wall-outlet type

Power Cord

Analog signal

D-sub

Digital signal

DVI

A

B

C

Connect DVI Cable

Connect Dsub Cable (PC)

Connect Dsub Cable (Mac)

Mac adapter

For Apple Macintosh use, a  separate plug adapter is
needed to change the 15 pin high density (3 row) D-
sub VGA connector on the supplied cable to a 15 pin
2 row connector.

DVI-D(This feature is not available in all countries.)

NOTE

‘ Self Image Setting Function’? 

This function provides the user with optimal display settings.When the user

connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual
input signals. 

‘AUTO/SET’ Function? 

When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted

screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve
resolution. 

NOTE

This is a simplified representation of the
rear view.
This rear view represents a general model;
your display may differ from the view as
shown.
User must use shielded signal interface
cables (D-sub 15 pin cable, DVI cable) with
ferrite cores to maintain standard
compliance for the product.