![background image](/i/line-6/138002/line-6-stagesource-l2t-stagesource-l2m/h/line-6-stagesource-l2t-stagesource-l2m-016.png)
L6 LINK
OUT/THRU
L6 LINK
IN
MAIN
OUT
RIGHT
MAIN
OUT
LEFT
RIGHT
INPUT
LEFT
INPUT
L6 LINK
IN
L6 LINK
IN
L6 LINK
OUT/THRU
L6 LINK
OUT/THRU
MONITOR
OUT
LINE
INPUT
SUB
SUB
S
maLL
pa
with
S
uBS
When using a traditional mixer with one or
more L2t/L2m speakers and one or more L3s
subs connected via L6 LINK, connect both
the Main Left and Main Right outputs of the
mixer to one L3s’s Left and Right inputs.
Connect the L3s’s L6 LINK Out/Thru to an
L2t or L2m you wish to designate as left.
Continue daisy-chaining speakers via
L6 LINK. L3 subs and L2 speakers will
automatically configure themselves as left,
right, or mono (left + right), according to the
table on page 12.
In the illustration to the right, the first sub
and first speaker are designated left. As there
are only two subs and two speakers, the
other L2t/L2m and L3s are automatically
designated right.
The floor monitor is connected via traditional
means from the mixer’s monitor output.