![background image](/i/loewe/153753/loewe-individual-mediacenter-individual-mediacenter-dr/h/loewe-individual-mediacenter-individual-mediacenter-dr-019.png)
Start-up
Network
Different settings must be made depending upon whether the
Mediacenter
has a
Depending on whether you use a wired (Ethernet, Powerline) or wireless (WiFi)
connection with your home network several settings will have to be made.
➠
Loewe recommends use of a wired network (Ethernet, Powerline) to ensure
a high stability and quality of the data link. Use a wireless connection only
if there is no option. As a matter of principle, wireless connections can get
disturbed due to external influences (e.g. microwave devices) and mostly
provide a lower data transmission rate.
Wired network
Here you make the settings for the selected network.
Call up Main Menu.
Select
Settings
option.
Confirm
OK
.
Select option
Network
.
Confirm
OK
.
Select
Connect Using
option.
Press
ASSIST
END
Connect
Using
Ethernet
Ethernet
Network Name
Connect to Network Share 1
Connect to Network Share 2
Settings - Network
Back
Home
OK
several times to set the
Ethernet
option.
IP Address Type DHCP
If a DHCP server is present in your home network (e.g. a DSL router), use this set-
ting since all network parameters are set automatically.
➠
Call up menu as under “Wireless network“.
Select
Set Ethernet
option.
Confirm
OK
.
Select
IP address type
option.
Press several times to set the
DHCP
option.
Select
Test settings
option.
Confirm
OK
.
ASSIST
END
IP-Address
Type
DHCP
Test Settings
Current Ethernet Settings :
IP Address: 192.168.0.10
Gateway: 192.168.0.1
Subnet Mask: 255.255.255.0
DNS 1, 2: 192.168.0.1, 192.168.1.1
Settings - Network - Ethernet
Back
Home
Now, an automatic test run starts, during which all settings
relevant for the flawless operation of the Mediacenter are
tested. A report is outputted on the screen during the
execution of the text.
ASSIST
END
Please wait...Test starting
Checking hardware configuration
MAC adress : 00:40:63:F9:95:73
Checking ethernet link...OK
Requesting dynamic interface configuration...OK
Determine subnet mask, DNS, route and IP addresses
Subnet mask : 255.255.0.0
DNS1 address : 192.168.0.1
DNS2 address : 192.168.1.1
Router address : 192.168.0.1
IP address : 192.168.0.10
Checking IP address...OK
Checking Router address...OK
Checking DNS addresses...OK
DNS lookup of w.openglobe.net...OK
DNS lookup of eCDDB.cddb.com...OK
Connecting to w.openglobe.net:80...OK
Determine external IP address
External IP address : 91.00.24.116
Checking time service...OK, Time is 08:04:26 (GMT)
Connecting to w.openglobe.net:443...OK
Connecting to w.openglobe.net:1755...OK
Connecting to w.openglobe.net:8000...OK
Connecting to eCDDB.cddb.com:8080...OK
Test completed
Test Settings
Back
Home
The network setting is successfully complete when all tests are
over and indicate an OK status.
Call up Main Menu.
19 -