![background image](/i/loewe/156708/loewe-speaker-2go/h/loewe-speaker-2go-023.png)
Speaker 2go
- 23 -
Operating instructions
English
Cable connection
Connecting the audio source via an audio cable
You can connect your Speaker 2go to your audio source, e.g. mobile phone, music player, etc.,
using an audio cable with 3.5mm jack plug (included in the set of equipment supplied).
Use the audio cable (
S
) with 3.5mm jack plug to connect the analogue stereo
audio output of your audio source (
A
) with the
AUX IN
stereo audio input
13
of the Speaker 2go.
The audio signal (page 26) is now replayed via the audio cable.
Charging the audio source
You may charge the battery of your audio source, e.g. a mobile phone, via your Speaker 2go.
To do so, use an USB cable with type A jack plug (available from your dealer) suitable for your
audio source.
Insert the type A plug of the USB cable into the USB socket
14
USB charge
only
of the Speaker 2go.
With power adapter, charging will take place independent on setting of sliding
switch
11
. Without power adapter, charging function is only activated with slid-
ing switch
11
at
ON
position.
If the battery capacity of the Speaker 2go is below 25%, external devices will
no longer be charged.
13
A
S
S
ON/OFF