![background image](/i/loewe/156708/loewe-speaker-2go/h/loewe-speaker-2go-024.png)
Speaker 2go
- 24 -
Operating instructions
English
Bluetooth link
Linking the audio source via Bluetooth
You can link your Speaker 2go to an audio source, e.g. smartphone, tablet PC, etc. using a
wireless Bluetooth connection. The audio sources must support the Bluetooth
A2DP
protocol.
The distance between your Speaker 2go and the audio source must be no more than 10m
(line of sight).
Up to 5 audio sources can be memorized by the Speaker 2go via Bluetooth. However, only
one active connection is possible at a time.
Press
the key
3
on the Speaker 2go
for a long period
(approx. 3 sec).
The LED indicator
4
(Bluetooth) will flash.
Enable the
Bluetooth function
of your audio source. If necessary, get help
from the instruction manual of your audio source.
If necessary, confirm the Bluetooth
Search
function of the audio source.
Now, Bluetooth devices will be searched near the audio source.
Select
Speaker 2go
.
If a code is requested, enter
0000
.
The LED indicator
4
lights up permanently.
Now, the Speaker 2go is linked to your audio source via Bluetooth and is ready
for audio playback (page 26).
For some audio sources, the link must be explicitly enabled before music play-
back can be heard from the Speaker 2go.
When switching the speaker 2go to standby using the
1
key, the audio source
will be delinked.
After switching the Speaker 2go on again using the
1
key, the Speaker 2go
tries to link to the audio source. In this situation the LED (Bluetooth)
4
pulses.
After successful linking the LED
4
will light up permanently.
3
4