Thank you for purchasing the Triton T2. With normal care and proper treatment it will provide years of 
reliable service. 

Please read all operating instructions carefully before use

.  

KEEP THE FOLLOWING POINTS IN MIND: 

* If the display becomes locked on Out2 please recalibrate the scale. 

* Do not Overload (exceed the capacity) of the scale including the weight of any trays or bowls 
combined with objects you may be weighing. Overload or Dropping/shocking the scale will damage the 
sensor and void your warranty. 

* Allow sufficient warm up time. Turn the scale On and wait several seconds to give the internal 
components a chance to stabilize before weighing.  

* The cleaner the environment the better. Dust, dirt, moisture, vibration, air currents and proximity to 
other electronic equipment can all cause an adverse effect on the reliability and accuracy of your scale.  

* Handle with care. Gently apply all items to be weighed onto tray top. Although this scale is designed to 
be quite durable, avoid rough treatment as this may permanently damage the internal sensor and void 
your warranty. 

* Avoid lengthy exposure to extreme heat or cold, your scale works best when operated and stored at 
normal room temperature. Allow the unit to acclimate to any major temperature change for at least one 
hour before use.  

*Place the item to be weighed on the platform, after the stable weight is displayed remove the item 
immediately. This will prolong the longevity and accuracy of this weighing instrument.. 

.** Do not operate near an in-use cell phone, cordless phone, radio, computer or other electronic 
device. These devices emit RF and can cause unstable scale readings. If your scale ever performs poorly, 
try moving the scale to a different room or location. This is a very precise scale - the display may seem to 
wander or jump when weighing. This is due to air currents or vibrations. Stable weighing is achieved 
when the display remains fixed for 3 seconds. 

OPERATION_____________________________________________ 
If your scale ever performs slowly, inaccurately, or shows the battery icon please replace the batteries.  
Battery Operation: 
1) Two “AAA” size Heavy Duty or Alkaline batteries are required. 
2) To install batteries: 
a) Release the battery cover by sliding the locks in-wards. 
b) Place batteries into battery compartment aligned correctly. 
c) Replace battery cover and lock it. 
DO NOT USE EXCESSIVE FORCE AND DO NOT PRESS ON THE TRAY 
3) The scale is now ready for battery operation. 
*Remove the batteries if you plan to store the scale for longer then 14 days