[Страница 4/9] - Инструкция: весы MyWeigh TRITON T2

Инструкция для MyWeigh TRITON T2

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

*Stable Indicator: There is a “o” stable indicator that appears on the left side of the LCD whenever the
scale is stable and at Zero
* Special Tray/Cover
The protective cover of the Triton is designed to also be used as a platform expansion tray. The cover
can only be removed when the scale is fully open. Simply fully open the scale to unlock the cover and
slide the cover towards the left of the scale. As pictured on the box, the cover can be used as a tray.
Place it on the scale’s weighing platform and turn the scale ON. The scale will automatically TARE (zero)
itself with the tray on the scale.(if this does not work properly, you can turn the scale ON, then place the
upside down cover on the tray and press the TARE key) This is perfect for weighing loose objects,
gunpowder, gems, Chinese herbs and more.
Please keep the protective cover installed when the scale is not in use (it will help protect the scale from
possible damage)

KEY PAD FUNCTIONS

* ON/OFF
Press and quickly release this key to turn unit on.
Press and hold to turn off scale
* TARE / ZERO
Press tare to reset the scale to zero. Tare can be used for eliminating the weight value of an empty
container. Place an empty container on the scale and press TARE. Then place the items to be weighed in
the container. Tare is also used as MEMORY. Simply place items to be weighed on the tray, press TARE
then remove the items. The weight of the items will be displayed as a negative value and remain on the
display in memory for easy reading.
NOTE: When all weight is removed from the weighing tray, the tared value of a container will be
displayed as a negative number. Depress tare again to return the to zero.
* CAL
The Cal Key is used to put the scale in Calibration mode as explained in the calibration instructions on
the other page.

** These electronic scale are precision instruments. Do not attempt to weigh near an in-use cell phone,
radio, computer or other electronic device. These devices emit RF and can cause incorrect or unstable
scale readings. Only operate in an interference free, very stable environment. If your scale ever
performs poorly, try moving the scale to a different location.

Please take good care of your TRITON T2 !

My Weigh is the Best Weigh

Triton Original (not T2) Manual:

Оглавление инструкции

Страница 1 из 10
TRITON T2 Owner's Manual & Troubleshooting Low Batteries & bad battery connections are the #1 cause of scale malfunction and inaccuracy! We test all of our scale returns from consumers. Fully 60% of consumer returns are battery related problems. This sounds silly but it's true! A scale will perform
Страница 2 из 10
Thank you for purchasing the Triton T2. With normal care and proper treatment it will provide years of reliable service. Please read all operating instructions carefully before use. KEEP THE FOLLOWING POINTS IN MIND: * If the display becomes locked on Out2 please recalibrate the scale. * Do not
Страница 3 из 10
CALIBRATION__________________________________________ Important: Always perform calibration procedure after first turning the unit on and allowing it to warm up and stabilize for 20 seconds. If possible please calibrate the scale on your SCALEPAD (included in the box), mousepad or similar surface.
Страница 4 из 10
*Stable Indicator: There is a “o” stable indicator that appears on the left side of the LCD whenever the scale is stable and at Zero * Special Tray/Cover The protective cover of the Triton is designed to also be used as a platform expansion tray. The cover can only be removed when the scale is
Страница 5 из 10
TROUBLESHOOTING & OPERATION NOTES: 1) If the Display ever becomes locked showing "Out2", please recalibrate the scale as outlined in the manual 2) If the Display ever becomes locked on 1HHH, LLLL or EEEE, this indicates that the scale was shocked, dropped or otherwise damaged and the delicate
Страница 6 из 10
 The cleaner the environment the better. Dust, dirt, moisture, vibration, air currents and proximity to other electronic equipment can all cause an adverse effect on the reliability and accuracy of your scale.  Handle with care. Gently apply all items to be weighed onto tray top. Although this
Страница 7 из 10
Calibration Procedure: NOTE: The Triton is designed with a recessed CAL key so that you won’t press it by accident during normal use. The CAL key is located between the TARE and ON/OFF keys. There is a small hole in between those keys - use a bent paperclip to press the recessed CAL key in that
Страница 8 из 10
Turn the scale on, Place an empty container or the tray on the scale and press TARE. The scale will reset to 0.0, then place the items to be weighed in the container and the correct weight of the items will appear on the display. NOTE: When all weight is removed from the weighing tray, the tared
Страница 9 из 10
Notes: It’s important that you never overload or drop/shock the scale. This scale is a delicate instrument and must be treated with care and caution. A well-treated scale will provide years of reliable and accurate weighing. However an abused scale will only work until it is damaged. Please be good
Страница 10 из 10

Инструкция для MyWeigh TRITON T2

Инструкции и руководства похожие на MyWeigh TRITON T2

Другие инструкции и руководства из категории весы