Инструкция для MyWeigh TRITON T2

(скачивание инструкции бесплатно)
Формат файла: PDF
Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.
Дополнительно: Чтение инструкции онлайн
background image

Turn the scale on, Place an empty container or the tray on the scale and press TARE. The scale will reset 
to 0.0, then place the items to be weighed in the container and the correct weight of the items will 
appear on the display.  

NOTE: When all weight is removed from the weighing tray, the tared value of a container will be 
displayed as a negative number. Depress tare again to return the display to 0.0.  

*Auto off 

An auto shut off feature is provided to conserve battery power. The unit will automatically 

turn off after approximately 2 minutes of inactivity.  

OPERATION_____________________________________________ 

 

If the scale shows the low battery indicator or performs slowly or inaccurately, please replace the 
batteries. Be sure the batteries are tightly in their compartment and are making contact with the 
battery prongs. BE CAREFUL NOT to push down on the scale’s platform when replacing the batteries! 

It’s best to close the main cover (not the battery cover) while replacing batteries. This will help prevent 
accidental overload of the scale.  

Battery Operation:  

1) Three "AAA" size ALKALINE batteries are required.  

2) To install batteries:  

a) Release the battery cover by sliding the battery cover off.  

b) Place batteries into battery compartment aligned correctly.  

c) Replace battery cover by sliding it closed.  

DO NOT USE EXCESSIVE FORCE ! 

 

3) The scale is now ready for battery operation. 

*Out2*

.  

If the display ever becomes locked on Out2 please recalibrate the scale as outlined above

.

  

Special Tray: 

 

The protective cover of the TRITON is designed to also be used as a platform expansion tray. Simply 
remove the cover, turn it upside-down, and place it on the scale’s weighing platform. Now turn the scale 
ON and the scale will automatically TARE (zero) itself with the tray on the scale. (if this does not work 
properly, you can turn the scale ON, then place the upside down cover on the tray and press the TARE 
key) This is perfect for weighing loose objects, gunpowder, gems, Chinese herbs and more.  

Please keep the protective cover installed when the scale is not in use (it will help protect the scale from 
possible damage)  

1
2
3
4
5
6
7
8
9
Оглавление инструкции
  • Страница 1 из 10
    TRITON T2 Owner's Manual & Troubleshooting Low Batteries & bad battery connections are the #1 cause of scale malfunction and inaccuracy! We test all of our scale returns from consumers. Fully 60% of consumer returns are battery related problems. This sounds silly but it's true! A scale will perform
  • Страница 2 из 10
    Thank you for purchasing the Triton T2. With normal care and proper treatment it will provide years of reliable service. Please read all operating instructions carefully before use. KEEP THE FOLLOWING POINTS IN MIND: * If the display becomes locked on Out2 please recalibrate the scale. * Do not
  • Страница 3 из 10
    CALIBRATION__________________________________________ Important: Always perform calibration procedure after first turning the unit on and allowing it to warm up and stabilize for 20 seconds. If possible please calibrate the scale on your SCALEPAD (included in the box), mousepad or similar surface.
  • Страница 4 из 10
    *Stable Indicator: There is a “o” stable indicator that appears on the left side of the LCD whenever the scale is stable and at Zero * Special Tray/Cover The protective cover of the Triton is designed to also be used as a platform expansion tray. The cover can only be removed when the scale is
  • Страница 5 из 10
    TROUBLESHOOTING & OPERATION NOTES: 1) If the Display ever becomes locked showing "Out2", please recalibrate the scale as outlined in the manual 2) If the Display ever becomes locked on 1HHH, LLLL or EEEE, this indicates that the scale was shocked, dropped or otherwise damaged and the delicate
  • Страница 6 из 10
     The cleaner the environment the better. Dust, dirt, moisture, vibration, air currents and proximity to other electronic equipment can all cause an adverse effect on the reliability and accuracy of your scale.  Handle with care. Gently apply all items to be weighed onto tray top. Although this
  • Страница 7 из 10
    Calibration Procedure: NOTE: The Triton is designed with a recessed CAL key so that you won’t press it by accident during normal use. The CAL key is located between the TARE and ON/OFF keys. There is a small hole in between those keys - use a bent paperclip to press the recessed CAL key in that
  • Страница 8 из 10
    Turn the scale on, Place an empty container or the tray on the scale and press TARE. The scale will reset to 0.0, then place the items to be weighed in the container and the correct weight of the items will appear on the display. NOTE: When all weight is removed from the weighing tray, the tared
  • Страница 9 из 10
    Notes: It’s important that you never overload or drop/shock the scale. This scale is a delicate instrument and must be treated with care and caution. A well-treated scale will provide years of reliable and accurate weighing. However an abused scale will only work until it is damaged. Please be good
  • Страница 10 из 10