![background image](/i/nikon/171204/nikon-18-55mm-f-35-56g-af-s-dx-vr-zoom-nikko/h/nikon-18-55mm-f-35-56g-af-s-dx-vr-zoom-nikko-014.png)
14
Jp
En
De
Fr
Es
Se
Ru
Nl
It
Ck
Ch
Kr
Thank you for purchasing the AF-S DX NIKKOR 18-55mm f/3.5-5.6G VR lens. DX Nikkor lenses are specially designed
for use with Nikon digital-SLR (Nikon DX format) cameras, such as the D300 and D90. When mounted on Nikon DX
format cameras, the lens picture angle is equivalent to approximately 1.5
×
the focal length in 35mm format. Before
using this lens, please read these instructions and refer to your camera’s
User’s Manual
.
Major features
• By enabling vibration reduction (VR), slower shutter
speeds (approximately three stops* at a focal length
of 55mm) can be used, thus increasing the range of
usable shutter speeds and zoom positions,
particularly when hand-holding the camera. (*Based
on results achieved under Nikon measurement
conditions. The effects of vibration reduction may
vary according to shooting conditions and use.)
• This lens employs a Silent Wave Motor to drive the
focusing mechanism, making autofocusing smooth,
silent and almost instantaneous. The A-M mode
switch
9
is provided for simple selection of
autofocus (A) or manual focus (M) operation.
• More accurate exposure control is possible because
subject distance information is transferred from the
lens to the camera body.
• The use of one aspherical lens element ensures sharp
pictures virtually free of color fringing. Also, the seven-
bladed diaphragm produces a nearly-circular
aperture, a feature which causes out-of-focus areas of
the picture to become soft and unobtrusive.
Mounting the lens
1
Turn the camera off.
2
Remove the rear lens cap (Fig. D).
3
Align the mounting index
7
on the lens with the
mounting mark on the camera body, and rotate the
lens counterclockwise until it clicks into place. Be
sure that the lens is in the correct position when the
mounting index
7
is on the top of the lens.
4
Remove the front lens cap. (Fig. C)
Removing the lens
Turn the camera off before removing the lens. Press and
hold the lens-release button on the camera while
turning the lens clockwise.
Using the Lens Hood HB-45
1
* (Fig. B)
*
Optional.
Attaching the hood
Lightly squeeze the lens hood attachment buttons
2
when attaching the lens hood
1
. To store the lens
hood
1
, attach it in the reverse position.
Removing the hood
Lightly squeeze the lens hood attachment buttons
2
when removing the lens hood
1
.