NetWork

Cable Tester 

1.wiremap
2.pair

&

length

3.coax/tel 

4.setup 

Product operation methods

Bott Screen:
Carry out self-checking at the same time (The dotted line dynamically

displays the course of self-checking from left to right):

Wait 5 seconds or push any arbitrary key to display main menu.

Main menu display:

Wiring diagram (WIREMAP) test function:

After entering the wiring diagram (WIREMAP), the tester shall 
carry out wiring diagram (WIREMAP) test and displays as follows

----

Testing

----

There are four functions to be chosen on main menu.

1. WireMap --- Wiring diagram measurement to check end-to-end 
    continuity of cables in M, L, R and locate errors.
2. Pair & Length ---Pair and measure length to know open,short,points,  
    verify cable length,open circuit distance.
3. Coax/Tel --- Coaxial cable and telephone line measurement to check
    continuity and indicate open circuit and short circuit.
4. SETUP---Calibrate and set up the tester (Refer to description 
    hereinafter).
    

Note: Never put a charged telephone cable into Rj45 port for fear 
of burnout to the testers.

12345678... 

Your excellent helper in cable test!

05