Test Result 1: Short circuit (SHORT)

It displays as follows if there is any short circuit in cable or terminal: 
(e.g.12 short circuit in the sample)

Short:
12 

At the moment, push       key to restart testing or push          key to return 
main menu.Always eliminate “short”error firstly and then start further 
measurement.

Test Result 2:

It will display as follows if the  cable to be checked does 

not insert into the remote unit  (ID) or if the cable does no insert into the 
local port.

No adapter:

At the moment, push 

key to restart testing or push          key toreturn 

main menu.

Test Result 3: Normal wiring diagram (WIREMAP) display

The tester will automatically detect remote unit  (ID) or local port (L)cable 
and it will display wiring diagram (WIREMAP) as follows if it finds the  
remote unit (ID) or cable to be checked in the local port(L):

Wire map:pass

R: 12345678  id1

Iiiiiiii 

M: 12345678 

"R" means “Remote tester” , "ID1"is the  number of Remote identifier .
"|" is the connecting line between “R” and “M”.
"M:" means “Main tester”.
At the moment, push       key to restart testing or push           key to return 
main menu.

PAIR&L

PAIR&L

PAIR&L

Your excellent helper in cable test!

06