Pair and length measurement (PAIR & LENGTH) function:

After entering into “PAIR & LENGTH" measurement , the tester shall 
have pair and length (PAIR & LENGTH) test and it will display as 
follows to indicate the measurement is being undertaken:

----

Testing

----

12345678... 

Note:In view of different technical parameters of different brand 
cables, the user should use “calibration" function before length 
measurement (Refer to the details herein).

Test Result 1: Short circuit (SHORT)

It will display as follows if there is any short circuit in cable or terminal:
(12 short circuit in the sample)

Short:
12 

(The tester is incapable to exactly locate short circuit.)
At the moment, push        key to restart test or push           key to return 
the main menu.
Always correct short circuit error first and then start further 
measurement.

Test Result 2

: Normal pair and length (PAIR &LENGTH) display

P a i r  12  100.0m 

P a i r  78   99.8m 

P a i r  36  100.3m 
P a i r  45  100.2m 

At the moment, push        key to restart test or push            key to return 
the main menu.

It will display as follows if pair and length(PAIR & LENGTH) 
measurement is in normal condition:

PAIR&L

PAIR&L

Your excellent helper in cable test!

08