NetWork

Cable Tester 

1.wiremap
2.pair

&

length

3.coax/tel 

4.setup 

Product operation methods

Start and display:
Carry out self-checking at the same time (The dotted line 
dynamically displays the course of self-checking from left to right):

Wait 5 seconds or push any key to display main menu.

Main menu display:

Wiring diagram (WIREMAP) test function:

After entering the wiring diagram (WIREMAP) test function, 
the tester shall carry out wiring diagram (WIREMAP) test and 
displays as follows while checking is being undertaken:

There are four functions to be chosen on main menu.

1. WireMap --- Wiring diagram measurement to check end-to-end 

    con-tinuity of cables M, L, R and locate error.

2. Pair & Length---Pair and measure length to verify cable length,

    open circuit, pairing .

3. Coax/Tel---Coaxial cable measurement to check continuity 

    and indicate open  and short circuit.

4. SETUP---Calibrate and length of cable.

----

Testing

----

12345678... 

Your excellent helper in cable test!

05