Test Result 1: Short circuit (SHORT)

It displays as follows if there is any short circuit in cable or 
terminal: (e.g.12 short circuit in the sample)

Short:
12 

At the moment,push        key to restart testing or push           key to 
return main menu.Always eliminate short circuit error first and then 
start further measurement.

Test Result 2:

Neither remote unit (ID) nor cable inserts into local port (L) .

The tester will automatically detect remote unit and connected, it will 
display as follows if the cable to be checked does not insert into the 
remote unit  or if the cable does not into the local(L)in local test:

No adapter:

At the moment, push 

key to restart testing or push           key 

toreturn main menu.

Test Result 3: Normal wiring diagram (WIREMAP) display

The tester will automatically detect remote unit or local port (L)cable 
and it will display wiring diagram (WIREMAP) as follows if the remote 
unit (ID) or the  cable to be checked is found:

Wire map:pass

R: 12345678  id1

Iiiiiiii 

M: 12345678 

“R:" means "Remote" tester.
"M:”means "Master" tester.
At the moment, push        key to restart testing or push           key to 
return main menu.

PAIR&L

PAIR&L

PAIR&L

Your excellent helper in cable test!

06