![background image](/i/pentax/154789/pentax-optio-wg-2-gps/h/pentax-optio-wg-2-gps-101.png)
99
3
Taki
ng Pi
ct
ur
es
Have a blank sheet of white paper or similar material ready.
1
In the [White Balance] screen, use the four-way controller
(
23
) to select
K
(Manual).
2
Point the camera at the blank sheet of paper or other material
so that it fills the frame displayed in the center of the screen.
3
Press the shutter release button fully.
The white balance is automatically adjusted.
4
Press the
4
button.
The setting is saved and the screen returns to the [
A
Rec. Mode] menu.
You can set the area of the screen where the brightness is metered to determine
the exposure.
1
Use the four-way controller (
23
) to select [AE Metering] on
the [
A
Rec. Mode] menu.
2
Press the four-way controller (
5
).
A pull-down menu appears.
3
Use the four-way controller (
23
) to select a metering
method.
4
Press the
4
button.
The setting is saved.
Manual Setting
Setting the AE Metering
L
Multi-segment
metering
The camera divides the image into 256 areas, meters the
brightness and determines the exposure.
M
Center-
weighted
metering
The camera takes a reading of the overall brightness of the
picture with the center of the image having more influence
on the exposure.
N
Spot AE
metering
The camera determines the exposure by metering the
brightness only at the center of the image.