![background image](/i/pentax/154789/pentax-optio-wg-2-gps/h/pentax-optio-wg-2-gps-247.png)
245
9
Appe
ndi
x
10
Use the four-way controller (
23
)
to select [Start], and press the
4
button.
Selecting [Record log] while recording a log
displays a confirmation screen. Select [Stop]
and press the
4
button to stop recording the
log.
Saves the recorded log to the SD Memory Card as a log file (KML format). The
log files are saved in the [GPSLOG] folder under the root directory of the SD
Memory Card.
1
Use the four-way controller (
23
) to select [GPS] on the
[
W
Setting] menu.
2
Press the four-way controller (
5
).
The [GPS] screen appears.
3
Use the four-way controller (
23
)
to select [GPS Logging].
• Once you record a log, you cannot record a new log until you save the
existing log to the SD Memory Card as a log file (p.245) or discard it (p.246).
• [Record log] can be set only when [GPS On/Off] is set to [On].
• When the battery level indicator is red, logging stops.
•
(Interval Shot) and
(Interval Movie) cannot be selected from the
Capture Mode Palette while recording a log.
Stopping Recording Log
Saving a Recorded Log
Record log
Start
Logging Interval
Logging Duration
OK
15sec.
1hr.
Starts log recording
MENU
OK
MENU
OK
Record log
Stop
Logging Interval
Logging Duration
OK
15sec.
1hr.
Stops log recording
GPS On/Off
GPS Logging
GPS Time Sync
Off
On
MENU
GPS
This part applies only to Optio WG-2 GPS camera