![background image](/i/pentax/154789/pentax-optio-wg-2-gps/h/pentax-optio-wg-2-gps-244.png)
242
9
Appe
ndi
x
When [GPS On/Off] is set to [On], the received GPS information is recorded onto
captured images.
The following icons appear on the display.
Record the GPS Information on Captured Images
(White)
During receiving GPS information. [GPS On/Off] on the [GPS] setting is
set to [On], and signals from GPS satellites are being received.
GPS information has been received. [GPS On/Off] on the [GPS] setting is
set to [On], and signals from GPS satellites have been received.
(Red)
GPS information has not been received. [GPS On/Off] on the [GPS]
setting is set to [On], but signals from GPS satellites have not been
received.
GPS error. To recover from an error, turn off the camera, remove and then
re-insert the battery and turn on the camera again. If
is still displayed,
the built-in GPS unit may be malfunctioning. Contact your nearest
PENTAX Service Center.
When [GPS On/Off] is set to [Off], no icon is displayed.
• Only when
is displayed on the capture mode screen, the GPS
information is recorded onto images.
• When [GPS On/Off] is set to [On], the camera performs positioning
regularly even if it is turned off, which reduces the battery life.
• When recording GPS information onto a movie, the data at the start of
recording is saved.
• When dividing a movie, the GPS information before dividing is displayed.
• When adding a title picture to a movie, the GPS information of the movie is
displayed.
• When shooting in
(Interval Shot) mode, GPS information may not be
recorded onto images.
This part applies only to Optio WG-2 GPS camera