![background image](/i/pentax/154789/pentax-optio-wg-2-gps/h/pentax-optio-wg-2-gps-119.png)
117
3
Taki
ng Pi
ct
ur
es
1
Use the four-way controller (
2345
) to select
(Interval
Movie) from the Capture Mode Palette.
2
Press the
4
button.
The current Interval Movie setting appears for approximately one minute. To
take pictures with the current settings, go to step 10.
3
Press the
4
button while the settings are displayed.
The Interval Movie setting screen appears. [Interval] is marked with the frame.
4
Set the interval.
1 Press the four-way controller (
5
).
A pull-down menu appears.
2 Use the four-way controller (
23
)
to set the interval, then press the
4
button.
The frame returns to [Interval].
5
Press the four-way controller (
3
).
The frame moves to [Total Time].
6
Set the total time.
1 Press the four-way controller (
5
).
2 Use the four-way controller (
23
) to set the hours, then press
the four-way controller (
5
).
3 Use the four-way controller (
23
) to set the minutes, then press
the four-way controller (
5
).
The frame returns to [Total Time].
7
Press the four-way controller (
3
).
The frame moves to [Start Delay].
8
Set the start delay.
1 Press the four-way controller (
5
).
2 Use the four-way controller (
23
) to set the hours, then press
the four-way controller (
5
).
3 Use the four-way controller (
23
) to set the minutes, then press
the four-way controller (
5
).
The frame returns to [Start Delay].
9
Press the
3
button.
The Interval movie setting is saved and the camera returns to capture mode.
MENU
Total Time
1
0
0
hr.
0
min.
10
Interval Shot
Interval
Start Delay
min.
hr.
0
min.
0