![background image](/i/pentax/154322/pentax-q7/h/pentax-q7-025.png)
2
Getting Started
23
• The date and time may be reset if you leave the battery
out of the camera for long periods of time. If this happens,
set the current date and time.
1
Slide the battery cover
in the direction of
1
.
2
Insert the battery until it locks
into place with the
A
mark
facing toward the lens.
To remove the battery, push
the battery lock lever in
the direction of
3
.
3
Close the battery cover, and
slide it in the direction of
5
.
t
Memo
• The battery level may not be displayed properly if the camera
is used at low temperatures or when performing continuous
shooting for a long time.
• Battery performance temporarily decreases as the
temperature decreases. When using the camera in cold
climates, have extra batteries at hand and keep them warm
in your pocket. Battery performance will return to normal
when returned to room temperature.
• Have extra batteries ready when traveling overseas, or taking
a lot of pictures.
We recommend the use of the AC adapter kit K-AC115
(optional) when using the monitor for a long time or when
connecting the camera to a computer or AV device.
1
Make sure that the camera is turned off, and open
the battery cover.
Remove the battery if it is inserted in the camera.
2
Pull down the connection
cable cover (
1
) on the
bottom side of the battery
chamber, and insert the DC
coupler into the battery
chamber.
To remove the DC coupler, push
the battery lock lever in the direction of
2
.
2
1
3
4
5
Using the AC Adapter
2
1
Q-7_OPM_eng.book Page 23 Tuesday, July 30, 2013 1:56 PM