![background image](/i/pentax/154322/pentax-q7/h/pentax-q7-059.png)
4
Playback
57
You can correct images where the flash has caused the subject
to appear with red eyes.
1
Display the image to edit in single image display.
2
Select
U
in the playback mode palette.
[The operation could not be completed correctly] appears
when red eyes cannot be detected on the camera.
3
Select [Save as] and press
E
.
u
Caution
• The Red-eye Edit function can be used only for the JPEG
images captured with this camera.
1
Display the image to edit in single image display.
2
Select
T
in the playback mode palette.
The screen to select a filter appears.
3
Use
ABCD
to select
a filter.
Use
V
to select a different
image.
Proceed to Step 6 if you do not need to change
the parameters.
4
Press
J
.
The parameter setting screen appears.
5
Use
AB
to select a
parameter, and use
CD
to adjust the value.
The parameters that can be set
varies depending on the selected
filter.
6
Press
E
.
The save confirmation screen appears.
7
Select [Apply additional filter(s)] or [Save as]
and press
E
.
Select [Apply additional filter(s)] when you want to apply
additional filters to the same image. The screen of Step 3
reappears.
u
Caution
• Only JPEG and RAW images captured with this camera can
be edited with the digital filters.
Removing the Red-eye Effect
Processes images with Digital Filters
Base Parameter Adj
Base Parameter Adj
Stop
Stop
OK
OK
OK
Parameter Adj.
Parameter Adj.
MENU
100-0001
100-0001
100-0001
Base Parameter Adj
Toy Camera
High Contrast
Shading
Tone Expansion
Invert Color
Extract Color
Unicolor Bold
Water Color
Posterization
Slim
Fish-eye
Retro
Sketch
Miniature
Soft
Starburst
Brightness
Brightness
Cancel
Cancel
OK
OK
OK
MENU
Q-7_OPM_eng.book Page 57 Tuesday, July 30, 2013 1:56 PM