![background image](/i/pentax/154322/pentax-q7/h/pentax-q7-036.png)
3
Sh
oo
ting
34
t
Memo
• Sets the adjustment steps for ISO sensitivity in [2. Sensitivity
Steps] of the
E
1 menu (default setting: 1 EV Step).
• Captured images may show more noise if a higher sensitivity
is set. You can reduce image noise by using [High-ISO NR]
of the
A
2 menu.
Choose the part of the sensor to use for measuring brightness
and determining exposure.
Set in the control panel or [AE Metering] of the
A
1 menu.
1
Press
C
in standby mode.
2
Use
CD
to select an item.
Auto
Applies Noise Reduction at optimally
calculated levels throughout ISO range.
(Default setting)
Low/High Applies Noise Reduction at constant chosen
level throughout ISO range.
AE Metering
v
/
A
1
A
Multi-
segment
The sensor meters the brightness in multiple
different zones. (Default setting)
In backlit locations, this mode automatically
adjusts exposure.
In [4. Link AE and AF Point] of the
E
1 menu,
you can link the exposure and AF point in
the focusing area.
B
Center-
weighted
Metering is weighted at the center of
the sensor.
The sensitivity increases at the center and
no automatic adjustment is performed even
during backlit scenes.
C
Spot
The brightness is measured only within
a limited area at the center of the sensor.
Useful when the subject is small.
Using the Built-in Flash
Y
A
Auto Flash
Discharge
Automatically measures the ambient light
and determines whether to use the flash.
B
Auto Flash
+Red-eye
Reduction
Discharges a pre-flash for red-eye
reduction before an automatic flash.
C
Flash On
Discharges a flash for each picture.
D
Flash On
+Red-eye
Reduction
Discharges a pre-flash for red-eye
reduction before the main flash.
E
Slow-
speed Sync
Sets to a slow shutter speed.
Use this when shooting a portrait with
the sunset in the background.
F
Slow-speed
Sync+Red-
eye
Discharges a pre-flash for red-eye
reduction before the main flash is
discharged with Slow-speed Sync.
H
G
Trailing
Curtain
Sync
Discharges a flash immediately before
closing the shutter.
Sets to a slow shutter speed.
Captures moving objects as if they are
leaving a light trail behind them.
J
Flash Off
The flash is deactivated.
Auto Flash Discharge
Auto Flash Discharge
Cancel
Cancel
OK
OK
OK
MENU
0.0
0.0
Q-7_OPM_eng.book Page 34 Tuesday, July 30, 2013 1:56 PM