17
EN
4
Close the card door.
5
Attach the front panel.
Tip
•
You can press
NAVI
to enter/exit the navigation system.
Use map
1
Tap to display main menu.
2
Tap .
»
The navigation menu is displayed in a few seconds.
3
Refer to the user manual of the navigation map to
operate the navigation tool.
8 Play with Bluetooth
device
You can make or receive phone calls with Bluetooth-enabled
phones through the unit. You can also listen to music from a
Bluetooth-enabled device.
Pair the Bluetooth-enabled devices
To connect your Bluetooth device to the unit, you need to pair
the device to the unit. Pairing needs only to be done once.
You can pair up to eight devices.
Note
•
The operational range between this unit and a
Bluetooth device is approximately 10 meters (30 feet).
•
Before you connect a Bluetooth device to this unit,
familiarize yourself with the Bluetooth capabilities of
the device.
•
Compatibility with all Bluetooth devices is not guaranteed.
•
Any obstacle between this unit and a Bluetooth device
can reduce the operational range.
•
Keep this unit away from any other electronic device
that may cause interference.
GPS Card
Pairing with unit
1
Tap to display home menu.
2
Tap .
»
The setting menu is displayed.
3
Tap to display Bluetooth setting menu.
4
Tap
[New Pairing]
to search for Bluetooth device with
your device.
5
Select the name of desired device in the pairing list.
6
Enter default password "0000" in your device.
»
iI the pairing succeeds. the phone call record is displayed.
Pairing with mobile phone
1
Open your mobile phone and switch on Bluetooth.
2
Search for other Bluetooth device with your device.
3
Select "CED780" in the pairing list.
4
Enter default password "0000".
»
If the pairing succeeds, the dial screen is displayed.
Disconnect Bluetooth devices
1
Under dial screen/Bluetooth audio mode, tap .
2
Tap
[Paired Device]
.
»
The Bluetooth/Paired device screen is displayed.
3
Tap on one device that you want to reconnect/
disconnect.
•
Tap (green) to reconnect the selected device.
•
Tap (red) to disconnect the selected device.
Tip
•
If the Bluetooth device is paired, under disconnect
mode, tap on top of the screen into the Bluetooth/
paired device list.
•
If there is no Bluetooth device in the paired device list,
tap on top of the screen, "Paired list is empty" is
displayed, you can tap to search the device.
•
If you do not want to reconnect the device to the
unit automatically, under Setting menu, tap >
[Auto
Connect]
, then select
[Off]
. For details, see "Adjust
Bluetooth settings" section.
