![background image](/i/sony/167183/sony-bravia-kdl-52z4500/h/sony-bravia-kdl-52z4500-050.png)
50
GB
System
Information
Displays the current software version and the signal level.
~
• If signal bar is red (no signal) or amber (low signal), check the aerial/cable
connection.
Time Zone
Allows you to manually select the time zone you are in, if it is
not the same as the default time zone setting for your country/
region.
Auto DST
Sets whether or not to automatically switch between summer
time and winter time.
On
Automatically switches between summer
time and winter time according to the
calendar.
Off
The time is displayed according to the
time difference set by “Time Zone.”
Programme
Guide
(only when GUIDE
Plus+ is available)
You can switch GUIDE (Sony Guide or GUIDE Plus+). If
you change Sony Guide to GUIDE Plus+ programme, see
page 18.
Condition that this feature is displayed is following:
– in UK, Italy, France, Germany or Spain.
– you can receive digital broadcasting.
– when “Antenna” is selected in step 7 of “5: Performing
the initial set-up.”
CA Module Set-up
Allows you to access a pay TV service once you obtain a Conditional Access
Module (CAM) and a view card. See page 23 for the location of the
(PCMCIA) socket.
Network Settings
Network
IP Address
Settings
DHCP (DNS
automatic)
Automatically acquires the network
settings through the Dynamic Host
Configuration Protocol server function of
the router or Internet service provider.
DHCP (DNS
manual)
Automatically acquires the network
settings except for DNS server settings.
You can manually set the DNS settings.
Manual
Allows you to set the network settings
according to your network environment.
Test
Diagnoses whether the network is correctly connected.
IP Address/
Subnet Mask/
Default Gateway/
Primary DNS/
Secondary DNS
You need to configure each item when “Manual” is selected
in “IP Address Settings.”
When “DHCP (DNS manual)” is selected, be sure to enter
“Primary DNS” and “Secondary DNS” server addresses
manually.
MAC Address
Displays the MAC address, which is a fixed, globally unique
identifier of the network device.
Server Display
Settings
Displays the connected server list and allows you to select the server you want to
display on the Home Menu.
Server Diagnostics
Diagnoses whether the TV can connect to each server on the home network.
Renderer Function
Enables playback of photos or music on the TV through other control devices on
the network, such as a digital still camera or mobile phone.
Renderer Access
Control
Allows you to specify the accessible controller to the TV. When this setting is set
to “On”, you can playback photos or music on the TV using the controller.