5
Instruction manual
5
look for the next available station and start
its broadcast. Repeat the operation to search
more stations.
• To save a station, press and hold MEM/
REP button. The memory position will blink.
Press MEM-UP/MEM-DN buttons to select a
memory position. Press MEM/REP button to
save the current station under the selected
number. You can store maximum 20 stations in
the memory.
• Hold the MEM/REP button for 2 seconds,
it will scan and save all the available stations
automatically.
During program saving, if no button is
pressed within several seconds, the unit will
return to normal radio mode.
• To call a saved station, press MEM-UP/
MEM-DN buttons.
• To adjust volume, in radio mode press
repeatedly VOL+/VOL- buttons.
• To switch off the radio, press POWER
button for 2 seconds.
USB/SD/MMC operation
Connecting USB/SD/MMC
• Insert a USB device into the USB port or
insert a memory card into the memory card
slot. Press FUNCTION button to enable USB/
SD/MMC mode. The unit will start reading the
device, LOAD will be displayed. Press and hold
button to select between USB or SD/MMC
mode, if both devices are inserted (USB is
played by default). If no device is detected, NO
CARD will be dislpayed.
• When the device and tracks on it are
detected, the display shows the total number of
tracks, currently playing track number, playback
time, equalizer mode and other playback
information. If no tracks are found in the
storage device, NO SONG will be displayed.
Playback operations
• During playback press button to pause
playback. Press this button again to resume
playback.
• During playback press TUNE/
/
/
TUNE buttons to go to previous or next track.
• During playback press STOP button to go
to clock mode.
• To adjust volume, press repeatedly VOL+/
VOL- buttons.
• During playback press ALARM/EQ button
to select equalizer mode: Normal - Classic -
Bass - Live - Rock. The mode will be displayed
blinking. Press MEM/REP button to select
playback mode: All - Shuffle - Repeat One -
Repeat All. Press SET button to confirm.
During play mode selection, if no button
is pressed within several seconds, the unit will
return to normal playback mode.
• When all tracks are played or pause mode
is enabled, the unit will go to clock mode after
30 seconds if no buttons are pressed.
• In playback mode, press MODE button
switch off the player and go to clock mode.
If afterward you press button, the unit will
resume playing the last played track.
General USB/SD/MMC notes
• This unit is equipped with a USB socket
that can accept and play MP3 files stored on
standard USB flash (compatible with USB
version 2.0) up to 32 GB.
• This unit is also equipped with an SD/
MMC card socket that can accept and play
MP3 files stored on standard SD/MMC cards
up to 32 GB.
Always switch off the unit or change
mode to another one before removing a
USB flash drive or SD/MMC card, to prevent
damage to your USB device or memory card.
Note:
Although this product is fully
compatible with USB 2.0 and SD/MMC card
standard formats, a small percentage of USB
flash drives and SD/MMC cards might not be
readable, due to those device manufacturers’
non-compliance with the full (official) USB and
SD/MMC card standards.
• FAT32 file system is supported by USB
and SD/MMC of this unit.