6
Instruction manual
6
Maintenance and care
If necessary, clean the unit with a piece of
cloth dampened with water only (be sure the
power cord is disconnected). The unit shall not
be exposed to dripping or splashing and no
objects filled with liquids, such as vases, shall
be placed on the unit. Normal ventilation of the
unit shall not be impeded for intended use.
Accessories
Receiver
1 pc
AC/DC power adaptor
1 pc
AG13 (1.5 V) battery
2 pcs
Remote controller with battery CR2025 1 pc
Audio cable 3.5-3.5 mm
1 pc
Instruction manual
1 pc
Warranty card
1 pc
Consumer information
1 pc
Alarm operation
Setting the alarm
• Press and hold ALARM button, then press
repeatedly AlARM button to go to setting
of parameters in following sequence: alarm
minute => alarm hour => alarm sound (OFF/
MP3/FM/Bibi). The selected parameter will
blink meaning readiness for adjustment.
• Press TUNE/
button to adjust the
parameter up. Press
/TUNE to adjust the
parameter down.
• In alarm time setting mode, if no button is
pressed within 10 seconds after a parameter
is selected, the unit will automatically return to
clock mode.
Radio/MP3 as alarm
• To use radio as alarm sound, enable radio
mode, select a station, then press and hold
ALARM button. AL SET will be displayed.
• To use MP3 as alarm sound, connect a
USB or memory card, then enable USB/SD/
MMC mode. Press and hold ALARM button.
AL SET will be displayed.
Do not select USB/SD as alarm signal
if a USB or memory card is not connected,
otherwise the alarm will not work.
Alarm switch off and Snooze
• When the alarm signal is on, press
SNOOZE button to interrupt the alarm signal
for 3 minutes. After 5 minutes the alarm sound
will go on again.
• When the alarm signal is on, ALARM button
to switch off the alarm sound completely.
Snooze function is only available if
default beeping sound is selected for alarm
signal.
Sleep timer
• Press the SLEEP button to set the
sleeping time, repeatedly press to change the
sleeping time interval from 10 to 90 minutes.
