![background image](/i/timberk/96055/timberk-tef-f16-fc2-2-tef-f16-fn3/h/timberk-tef-f16-fc2-2-tef-f16-fn3-005.png)
www.timberk.com • Electric drier for changing of air humidity
5
4. APPLIANCE DESCRIPTION
5. DELIVERY SET
6. APPLIANCE CONTROL
The appliance setup is described in the scheme below.
1. Control panel
2. Air-outlet grille
3. Handle for transportation
4. Appliance body
5. Air-inlet grille
6. Aperture for permanent condensate removal
7. Condensate tank
Completed set of the appliance:
Appliance (air drier) - 1 piece
Appliance packing - 1 piece
User manual -1 piece
Guarantee slip -1 piece
1.Power button. Use this button to turn the appliance on or off.
2.Fan speed button. Use this button to switch the fan rotation speed: LOW,
HIGH. The higher the fan speed, the higher is the drying capacity.
3.Timer button. Use the timer button to set the time for shutdown of the
appliance. For that press the TIMER button to select a needed time period
(from 1 to 24 hours) for automatic shutdown of the appliance.
4.Button for switching of modes (Set). Using this button (pressing in
successive order), you may set the following operating modes:
CO - maximum mode (the compressor is running without stopping)
- 30% - maintaining humidity of 30%
40% - maintaining humidity of 40%
50% - maintaining humidity of 50%
DEFROST
LOW
TANK FULL
HIGH
TIMER
POWER
1
2
3
4
5
6
7
8
9
11
10
Fig. 1.
Fig. 2.
Fig. 3.