6
ENGLISH
•
Set the driving shaft (13) into the attachment (15).
Note:
Check whether the attachment (15) is set
properly, otherwise the processor lid (12) will not close.
•
Install the geared lid (12) on the bowl (19).
•
Press the lock button (18) and turn the geared lid
(12) counterclockwise to the position “ ”, release
the lock button (18) and make sure that the geared
lid (12) is fixed properly.
•
Install the motor unit (4) on the geared lid (12) and
rotate it clockwise until it is fixed.
•
Insert the plug into the mains socket.
•
Set the required speed (from 1 to 20) using the con-
trol knob (1).
•
To switch the blender on, press and hold the but-
ton (2).
•
When the button (3) is pressed, the knife rotates at
maximal rotation speed.
•
Place the products into the chute of the lid (12),
use the pusher (11) for products feeding. Press the
pusher gently while feeding.
•
After using the unit, remove the plug from the mains
socket, disconnect the motor unit (4) from the
geared lid (12) by turning it counterclockwise.
•
Then remove the geared lid (12) from the bowl (19),
pressing the button (18) and turning the lid clock-
wise.
•
Carefully remove the attachment (15).
•
Take the chopped products out of the processing
bowl (19).
•
Clean, wash and dry all the used parts immediately
after operation .
CLEANING THE UNIT
•
Always switch the unit off and unplug it right after
operation or before cleaning.
•
Clean, wash and dry all the used parts immediately
after operation.
•
It is recommended to wash all removable parts in
warm water with neutral detergent. You can wash
the discs in a dishwashing machine.
•
For easy cleaning of the cubic grid (17) take it out
of the attachment (15) and remove the remaining
products using the pusher (10).
•
After processing salty or sour products, rinse the
used attachments with water immediately.
•
Clean the motor unit (4) with a damp cloth.
•
Do not use coarse sponges, abrasives and solvents
to clean the unit.
•
Do not immerse the motor unit (4), whisk gear (6),
mash making attachment gear (8), processor bowl
geared lid (12) into water or any other liquids, do not
wash them in a dishwashing machine.
•
For easy cleaning of the mash making attachment
(9) it is provided with removable spatulas. Place the
attachment (9) with spatulas turned towards you,
unscrew the lock, turning it clockwise (left thread)
and remove the spatulas, wash them, wash the at-
tachment (9), do not let the detergent solution get
inside the attachment. Dry and assemble the at-
tachment (9), install the spatulas and fix them with
the lock, turning it counterclockwise (left thread).
•
While possessing products with strong dyeing prop-
erties (for instance carrot or beet-root) the bowls
and attachments can get colored, wipe them with a
cloth dampened in vegetable oil.
STORAGE
•
Clean and dry the attachments thoroughly before
taking them away for storage.
•
Do not wind the power cord around the motor unit.
•
Keep the blender set away from children in a dry
cool place.
DELIVERY SET
Motor unit – 1 pc.
Blender attachment – 1pc.
Whisk gear – 1pc.
Whisk – 1 pc.
Mash making attachment gear - 1 pc.
Mash making attachment – 1 pc.
Geared lid – 1 pc.
Chopping knife – 1 pc.
Processing bowl – 1pc.
Shredding/slicing disc – 1pc.
Measuring cup – 1pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50/60Hz
Maximal power consumption: 1000 W
The manufacturer preserves the right to change
the specifications of the unit without a preliminary
notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be ob-
tained from the dealer from whom the appliance was
purchased. The bill of sale or receipt must be produced
when making any claim under the terms of this guaran-
tee.
This product conforms to the EMC-Re-
quirements as laid down by the Council
Directive 2004/108/ЕС and to the Low Vol-
tage Regulation (2006/95/ЕС)
VT-3401.indd 6
15.07.2013 11:36:58
