![background image](/i/zelmer/156307/zelmer-hc1002/h/zelmer-hc1002-109.png)
109
HC1002-001_v01
Unplug the adaptor from the mains after charging.
●
To unplug the adaptor, never pull on the power cord as this may damage
the unit. Hold the adaptor firmly and pull it out of the power outlet.
Operating time with fully charged battery is about 50 minutes.
Charging with the appliance placed on the vertical support
Check if the appliance is OFF.
●
1
Insert the adaptor connector into the charging port on the charging stand.
To prevent damage to the appliance, make sure the charging port is dry
before inserting the adaptor connector.
2
Press the vertical support release bottom.
3
Place the appliance on the vertical support. Make sure that the charging port on the
appliance rests safely on the charging connector on the stand.
Connect the adaptor plug into a suitable mains supply outlet (see the rating plate on
●
the adaptor).
– Charging of the battery used in the appliance takes approximately 90
minutes.
– The charging process may be terminated earlier than 90 minutes by the
overcharge protection circuit.
– When charging, the current battery level is displayed graphically and
numerically (in percentage) and the power indicator light is on.
– When the battery is fully charged, the battery percentage status shows
100 and the LCD screen glows blue.
Unplug the adaptor from the mains after charging.
●
To unplug the adaptor, never pull on the power cord as this may damage
the unit. Hold the adaptor firmly and pull it out of the power outlet.
Operating time with fully charged battery is about 50 minutes.
D