![background image](/i/zelmer/156307/zelmer-hc1002/h/zelmer-hc1002-111.png)
111
HC1002-001_v01
– Charging the battery outside the appliance takes approximately 12
hours.
– The charging process may be terminated earlier than 12 hours by the
overcharge protection circuit.
4
Unplug the adaptor after charging and detach the connector from the charging slot.
To unplug the adaptor, never pull on the power cord as this may damage
the unit. Hold the adaptor firmly and pull it out of the power outlet.
5
Replace the battery. To do this, insert the lug of the battery under the housing of the
appliance.
6
Push the battery all the way in toward the appliance until it clicks into place.
A fully charged appliance has a cordless operating time of up to 50
minutes.
Handling and operation
PLACING, REMOVING & REPLACING ATTACHMENTS
Select appropriate attachment for your desired hair length.
●
Each attachment comb is marked with a different hair-length setting. The
setting is located on the outside of each attachment (e.g. 4-6 mm).
1
Mount the attachment on the sides of the appliance. The lugs on the attachment must
lock into small grooves located on both sides of the appliance.
2
To change the attachment, pull one side of the attachment gently outwards until the lug
is detached from the groove on the appliance. Remove the attachment.
3
Replace with your selected attachment as described in section 2.
USE OF THE APPLIANCE
For even cutting result, the attachment must move freely through the hair.
Do not move the clipper too quickly or force it through the hair.
1
Place your selected attachment on the appliance (see section
PLACING, REMOVING
& REPLACING ATTACHMENTS
).
Cut the hair to the desired length stepwise, staring with the longest
attachment comb.
G
H