![background image](/i/zelmer/156307/zelmer-hc1002/h/zelmer-hc1002-113.png)
113
HC1002-001_v01
Cleaning and maintenance
Before cleaning, make sure the appliance is OFF and unplugged.
1
Remove the attachment from the appliance (see
PLACING, REMOVING
& REPLACING ATTACHMENTS
).
2
Wash the attachment under running water and dry thoroughly.
CLEANING THE CUTTING HEAD
Remove the cutting head when cleaning is required.
1
Place your thumb on the cutting head and push forward, until it comes out of the
mounting.
2
Remove any hair from the cutting element using the brush supplied with the product.
3
Replace cutting head on the appliance. To do so, insert the lug of the cutting head into
the slot on the housing of the appliance.
4
Press gently forward until you hear a click indicating that the component is securely in
place.
APPLYING LUBRICATING OIL TO CUTTING BLADES
If the appliance is used regularly, lubricate cutting blades periodically
with the oil supplied with the product or with any acid-free lubricating oil
(e.g. sewing machine oil).
1
Remove the attachment (see
PLACING, REMOVING & REPLACING
ATTACHMENTS
).
2
Place your thumb on the cutting head and push forward, until it comes out of the
mounting.
3
Pull the blades back as show in the picture.
4
Apply 1-2 drops of the oil to the cutting teeth.
5
Replace cutting had and run the appliance to distribute the oil inside the cutting unit.
6
Turn off the appliance and wipe off any excess oil with a cloth.
I
J
K