16
XENYX X2442USB/X2222USB/X1832USB/X1622USB User Manual
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
Connect the insert send with the input and the
insert return with the output of the effects device.
Insert send return ¼" TRS connector
ring
return (in)
tip
send (out)
Fig. 6.5: Insert send/return stereo plug
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
¼" TRS headphones connector
ring
right signal
tip
left signal
Fig. 6.6: Stereo plug for headphones connection
7. Specifications
Microphone Inputs (XENYX Mic Preamp)
Type
XLR, electronically balanced,
discrete input circuit
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ω source resistance
-134 dB / 135.7 dB A-weighted
@ 50 Ω source resistance
-131 dB / 133.3 dB A-weighted
@ 150 Ω source resistance
-129 dB / 130.5 dB A-weighted
Frequency response
<10 Hz - 150 kHz (-1 dB),
<10 Hz - 200 kHz (-3 dB)
Gain range
+10 to +60 dB
Max. input level
+12 dBu @ +10 dB Gain
Impedance
approx. 2.6 kΩ balanced
Signal-to-noise ratio
110 dB / 112 dB A-weighted
(0 dBu In @ +22 dB gain)
Distortion (THD + N)
0.005% / 0.004% A-weighted
Line Input
Type
¼" TRS connector
electronically balanced
Impedance
approx. 20 kΩ balanced
10 kΩ unbalanced
Gain range
-10 to +40 dB
Max. input level
30 dBu
Fade-Out Attenuation
1
(Crosstalk Attenuation)
Main fader closed
90 dB
Channel muted
89 dB
Channel fader closed
89 dB
Frequency Response
Microphone Input to Main Out
<10 Hz - 90 kHz
+0 dB / -1 dB
<10 Hz - 160 kHz
+0 dB / -3 dB
Stereo Inputs
Type
¼" TRS connector,
electronically balanced
Impedance
approx. 20 kΩ
Max. input level
+22 dBu
EQ Mono Channels
Low
80 Hz / ±15 dB
Mid
100 Hz - 8 kHz / ±15 dB
High
12 kHz / ±15 dB
