Operating the clock/programmer

The timer display is in 24 hour clock format. 

Ensure that the correct time of day is always set 

^ before using your cooker.

A will light:
- When the timer is first 
turned on it will flash. (It 
should go out when the 
time of day is set).
- When an Auto Cooking 

programme has been set.

The clock must be set before the oven can be 

operated.

tfr This "Cookpot" symbol will light up either.

- When the cooker is in "Manual Mode".
- When you press the izj Cook Period button and set a 

length of time for an Automatic Cooking programme.

iffr symbol will light up during Automatic Cooking.

O will light up when you select a Minute Minder period 

and will remain on for the period set.

O minute minder

Here you can set a time period of up to 23 hours and 59 
minutes that will count down.

When it reaches zero the timer will bleep.
e.g. If you set 20 minutes, the timer will start bleeping 20

minutes later.

/ / / /

*—f

 cook period

Cook Period is the actual length of time for which, the 

timer will switch the oven on as part of an "Automatic 

Cooking" programme.
e.g. If you set 2 hours, the food will be cooked for 2 hours.

TsTOPTend time

The time of day at which you want an automatic cooking 

programme to 

end.

e.g. 

If you set a cook period for 2 hours, and end time of 1 1 : 0 0 .  

The timer will switch the oven on at 9:00 and turn the oven off 
at 1 1 : 0 0 .  You will hear a bleep at 1 1 : 0 0  to indicate that the 
automatic cooking programme has finished.

Notes

-  When setting an automatic cooking programme you will 

need to set the oven control to the required temperature when 

you set the timer.
-  If an automatic cooking programme has been set the oven 
will only operate during the pre-programmed time.

"+" and

Used to adjust the various timer function settings.

-  Used to adjust pitch of audible tone.

16