Operation
28
4. Advance Menu
FUNCTION
DESCRIPTION
Mirror
The projector can be installed on a ceiling or behind a screen, or with one
or more mirrors. Contact your dealer for the ceiling mount bracket
(optional accessory) if you need to install the projector on your ceiling.
Floor front: Select this setting with
the projector set on the floor and
audience viewing the projected
images from the front side of the
screen. This is the most common
setting.
Ceiling front: Select this setting with
the projector suspended from the
ceiling and audience viewing the
projected images from the front
side.
Floor rear: Select this setting when
the projector is placed near the
floor and behind the screen. A
special rear projection screen is
required.
Ceiling rear: Select this setting when
the projector is suspended from the
ceiling and placed behind the
screen. A special rear projection
screen is required.
Blank Time
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen.
Source Scan
Sets whether the projector searches automatically for input signals. If the
source scan is on, the projector will scan for input signals in the following
order: Analog RGB --> Video --> S-Video until it acquires a signal. If the
function is not activated, the projector selects the last input signal.
Language
Language sets the language for the OSD control menus.
Use
3
Left/ Right
4
on the projector or
3
/
4
on the remote control to
select your desired language from among English, French, German, Ital-
ian, Spanish, Russian, Traditional Chinese, Simplified Chinese, Japanese
and Korean.
User Logo
Enables the user to select which logo screen will appear during projector
start-up. Three modes are available: Default (BenQ logo), black screen or
blue screen.
