Important Safety Instructions

3

Safety Instructions (Continued)

7.

Do not place this projector in any of the 
following environments. 

- Space that is poorly ventilated or confined. 

Allow at least 50 cm clearance from walls 

and free flow of air around the projector. 

- Locations where temperatures may 

become excessively high, such as the 

inside of a car with all windows rolled up.

- Locations where excessive humidity, dust, 

or cigarette smoke may contaminate 

optical components, shortening the 

projector’s life span and darkening the 

image.

- Locations near fire alarms
- Locations with an ambient temperature 

above 40°C / 104°F

- Locations where the altitudes are higher 

than 10000 feet.

8.

Do not block the ventilation holes. 

- Do not place this unit on a blanket, 

bedding or any other soft surface. 

- Do not cover this unit with a cloth or any 

other item. 

- Do not place inflammables near the 

projector.   

If the ventilation holes are seriously 

obstructed, overheating inside the unit 

may result in a fire.

9.

Always place the unit on a level, hori-
zontal surface during operation.

- Do not use if tilted at an angle of more 

than 10 degrees left to right, nor at angle 

of more than 15 degrees front to back. 

Using the unit when it is not fully 

horizontal may cause a malfunction of, or 

damage to, the lamp. 

10.

Do not stand the unit on end vertically. 

Doing so may cause the unit to fall over, 

causing injury or resulting in damage to 

the unit.

ft.

10000