9

Trouble-Shooting

Problem

Possible reason

Remedy

SHAVER
Unpleasant smell 

from the shaver head. 

1. Shaver head is cleaned with 

water.

2. Cleaning cartridge is in use 

for more than 8 weeks.

1. When cleaning the shaver head with water only 

use hot water and from time to time some liquid 

soap (without abrasive substances). Remove  

Foil & Cutter cassette to let it dry.

2. Change cleaning cartridge at least every 8 weeks.

Battery performance 

dropped significantly. 

1. Foil and cutter are worn 

which requires more power 

for each shave.

2. Shaver head is regularly 

cleaned with water but not 

lubricated.

1. Renew Foil & Cutter cassette.

2. If the shaver is regularly cleaned with water, apply 

a drop of light machine oil on top of the foil once 

a week for lubrication.

Shaving performance 

dropped  significantly.  

1. Foil and cutter are worn.

2. Shaving system is clogged.

1. Renew Foil & Cutter cassette.

2. Soak the Foil & Cutter cassette into hot water 

with a drop of dish liquid. Afterwards rinse it 

properly and tap it out. Once dry apply a drop of 

light machine oil on the foil. 

Battery segments  

in the display  

are skipped with 

decreasing battery 

capacity.

Foil and cutter are worn which 

requires more power for each 

shave.

–  Renew Foil & Cutter cassette.

–  Regularly oil the shaving system, especially when 

cleaning with water only. 

Shaver head is 

humid.

1. Drying time after automatic 

cleaning was too short.

2. Drain of the Clean&Charge 

Station is clogged.

1. Clean directly  after shaving to allow enough time 

for drying.

2. Clean the drain with a wooden toothpick.

CLEAN&CHARGE STATION
Cleaning does not 

start when pressing 

the start button.

1. Shaver is not placed properly 

in the Clean&Charge Station.

2. Cleaning cartridge contains 

not enough cleaning fluid 

(display blinks red).

1. Insert shaver into the Clean&Charge Station and 

push it to the rear side of the station (contacts  

of the shaver need to align with contacts in the 

station).

2. Insert new cleaning cartridge. Press start button 

again.

Increased 

consumption of 

cleaning fluid.

Drain of the Clean& Renew 

station is clogged.

–  Clean the drain with a wooden toothpick.

–  Regularly wipe the tub clean.

Guarantee

We grant a 2 year guarantee on the product commencing on the date of purchase. Within the guarantee 

period we will eliminate any defects in the appliance resulting from faults in materials or workmanship,  

free of charge either by repairing or replacing the complete appliance at our discretion.

This guarantee extends to every country where this appliance is supplied by Braun or its appointed 

distributor.

This guarantee does not cover: damage due to improper use, normal wear or use as well as defects that 

have a negligible effect on the value or operation of the appliance. The guarantee becomes void if repairs  

are undertaken by unauthorised persons and if original Braun parts are not used.
To obtain service within the guarantee period, hand in or send the complete appliance with your sales  

receipt to an authorised Braun Customer Service Centre (address information available online at  

www.service.braun.com)

For UK only:

This guarantee in no way affects your rights under statutory law.

92214488_5090cc_CEE_S6-74.indd   9

10.04.12   08:57