14

Scanning Film 

3

In the [Select source] category, select [Film].

4

In the [Film type] category, select [Nega/Sleeve] or 

[Posi/Sleeve].

3

Select the film type in the [Select source] category. 

Select an option from the following. 

• Color Negative Film
• Color Positive Film
• B&W Negative Film
• B&W Positive Film

4

Select options for other categories as required, such 

as the Color Mode or Output Resolution.

Output Resolution is the resolution when an image is enlarged 

to a print size. You are recommended to select the following 

resolutions for the respective uses of the image.
• For viewing on a computer screen or attaching to an e-mail message: 75 dpi
• For printing at standard print sizes: 300 dpi

Simple Mode

• Only film strips can be scanned in Simple 

mode. To scan slides, switch to the Advanced 
mode by clicking the [Advanced Mode] 
button on the bottom right of the window.

Advanced Mode

• A warning message will display if you set the Output Resolution too high. If you proceed 

anyway, it may take an extremely long time to scan and yield a very large image file.