Using the printer

13

 NOTE: 

To avoid smearing ink, remove each transparency or photo from the paper exit tray 

before the next one exits the printer. Transparencies and photos may require up to 15 minutes to 
dry.

You can load up to:

Make sure:

100 sheets of 

plain

paper

The paper is designed for use with inkjet printers.

• The envelopes are loaded vertically against the right side of the 

paper support.

• The stamp location is in the upper left corner.
• The envelopes are designed for use with inkjet printers.
• You squeeze and slide the paper guide to the left edge of the 

envelope (as shown).

NOTE: 

Do not load envelopes with:

• Holes, perforations, cutouts, or deep embossing.
• Metal clasps, string ties, or metal folding bars.
• Exposed flap adhesive.

10 

envelopes

25 sheets of 

labels

The labels are designed for use with inkjet printers.

10 sheets of 

card

stock

• The card stock is designed for use with inkjet printers.
• The thickness does not exceed 0.025 inches.

10 

greeting

cards

, 

index

cards

, 

postcards

, or 

photo

cards

The cards are loaded vertically against the right side of the paper 

support.

25 sheets of 

coated

, 

photo

, or 

glossy

paper

The glossy or coated side faces you.

10 

transparencies

• The transparencies are designed for use with inkjet printers.
• The rough side faces you.

100 sheets of 

custom

size

paper

Your paper size fits within these dimensions:

Width

– 76 to 216 mm
– 3.0 to 8.5 in.

Length

– 127 to 432 mm
– 5.0 to 17.0 in. 

25 

iron-on

transfers

• You follow the loading instructions on the iron-on packaging.
• The blank side faces you.

20 sheets of 

banner

paper

The banner paper is designed for use with inkjet printers.