2 4
S e t u p f o r n e t w o r k p r i n t i n g
w
w
w
.
d
e
ll.
co
m/
su
p
p
l
i
e
s |
su
p
p
o
r
t
.
d
e
l
l.c
o
m
An IP Address is a unique string of numbers consisting of four (4) Octets, each Octet
separated using a period. Example: 192.168.1.108. Assigning an IP address already in use
can cause serious network performance issues.
See page 56 for details on using the Operator Control Panel.
To setup the printer to use a STATIC IP address:
1
Make sure the printer is on and the
Ready
message appears.
2
Press the Menu button until you see
Network Menu
, and then press Select.
3
Under
Network Menu
, the item
Standard Network
appears. Press Select.
4
Under
Standard Network
, press the Menu button until you see the item
STD
NET SETUP,
and then press Select.
5
Under
STD NET SETUP
, press the Menu button until you see the item
TCP/IP
, and
then press Select.
6
Under
TCP/IP
, press the Menu button until you see the item
Enable BOOTP
, and
then press Select.
7
Press the Menu button to select
No
, and then press Select. The word
SAVED
will
briefly display.
8
Repeat steps 6 & 7 to select No for the items
ENABLE DHCP
and
ENABLE RARP
.
9
Under
TCP/IP
, press the Menu button until you see the item
Set IP Address
,
and then press Select.
10
The number in the 1st Octet is flashing. Using the Menu button, cycle the 1st Octet
of the IP Address to the number desired, and then press Select.
11
The number in the 2nd Octet is flashing. Using the Menu button, cycle the 2nd Octet
to the number desired, and then press Select.
12
The number in the 3rd Octet is flashing. Using the Menu button, cycle the 3rd Octet
to the number desired, and then press Select.
13
The number in the 4th Octet is flashing. Using the Menu button, cycle the 4th Octet
to the number desired, and then press Select. The word
SAVED
will briefly display.
14
Under
TCP/IP
, press the Menu button until you see the item
Set IP Netmask
,
and then press Select.
15
Repeat steps 10 through 13 to set each Octet for Netmask.
16
Under
TCP/IP
, press the Menu button until you see the item
Set IP Gateway
,
and then press Select.
