16
GB
Replacing the filament
cassette :
RISK OF INJURY !
A
V
Never use metallic cutting elements or
replacement parts and accessories not
provided by GARDENA.
Only use original GARDENA Filament Cassettes. You can
order Replacement Filament Cassettes from your GARDENA
dealer or directly from the GARDENA Customer Service.
•
Filament Cassette for
Turbotrimmer ProCut 800 / 1000 :
Art. No. 5308
1. Unplug the mains plug.
2. Grip the filament cassette holder
M
and unscrew the cassette
cover
N
.
3. Remove the filament cassette
O
from the cassette holder
M
and untwist the spring.
4. Remove any dirt.
5. Pull about 10 cm of the filament
1
from the new cassette
O
out through the slot
P
in the cassette.
6. Turn the spring
Q
into the new filament cassette
O
and thread
the cutting filaments
1
into the filament cassette holder
M
.
7. Insert the cassette
O
into the
cassette holder
M
and turn it
so that the markings
R
on
the cassette are visible in the
holes in the cassette holder
M
.
When doing this the cutting
filaments must not get trapped.
8. Insert the cassette holder and
the cassette until the end of
the spindle
S
sticks out about
5 mm.
9. Screw the cassette cover
N
onto the end of the spindle
S
.
v
If the markings
R
cannot be turned until they are under the
holes, turn the cassette
O
to and fro until it fits into the
cassette holder
M
properly.
7. Troubleshooting
Risk of injury from the cutting filament !
V
Always unplug the mains plug of the Turbotrimmer
before troubleshooting.
If the cutting filament has disappeared into the filament cassette
or the tap mechanism still doesn’t work after pulling the cutting
filament
1
it may be fused together in the filament cassette
O
.
1. Unplug the cable from the mains.
2. Remove the filament cassette
O
as described in
6. Maintenance
“Replacing the filament cassette”.
P
R
1
M
Q
R
O
N
P
1
R
M
R
1
1
O
RISK OF INJURY !
Releasing a cutting filament
that has gone into the
cassette or which has fused :
N
M
O
S
