If you connect the printer to a line with distinctive ring, have your telephone company assign one ring pattern
to voice calls and another ring pattern to fax calls. HP recommends that you request double or triple rings for
a fax number. When the printer detects the specified ring pattern, it answers the call and receives the fax.
TIP:
You can also use the Ring Pattern Detection feature in the printer control panel to set distinctive ring.
With this feature, the printer recognizes and records the ring pattern of an incoming call and, based on this
call, automatically determines the distinctive ring pattern assigned by your telephone company to fax calls.
If you do not have a distinctive ring service, use the default ring pattern, which is
All Rings
.
NOTE:
The printer cannot receive faxes when the main phone number is off the hook.
To change the answer ring pattern for distinctive ring
1.
Verify that the printer is set to answer fax calls automatically.
2.
From the printer control panel display, touch
Fax
.
3.
Touch
Setup
, and then select
Preferences
.
4.
Touch
Distinctive Ring
.
5.
A message appears stating that this setting should not be changed unless you have multiple numbers
on the same telephone line. Touch
Yes
to continue.
6.
Do one of the following:
●
Touch the ring pattern assigned by your telephone company to fax calls.
●
Touch
Ring Pattern Detection
, and then follow the instructions on the printer control panel.
NOTE:
If the Ring Pattern Detection feature cannot detect the ring pattern or if you cancel the feature
before it finishes, the ring pattern is automatically set to the default, which is
All Rings
.
NOTE:
If you are using a PBX phone system that has different ring patterns for internal and external
calls, you must call the fax number from an external number.
Set the dial type
Use this procedure to set tone-dialing or pulse-dialing mode. The factory-set default is
Tone
. Do not change
the setting unless you know that your phone line cannot use tone dialing.
NOTE:
The pulse-dialing option is not available in all countries/regions.
To set the dial type
1.
From the printer control panel display, touch
Fax
.
2.
Touch
Setup
, and then touch
Preferences
.
3.
Touch
Dial Type
.
4.
Touch to select
Tone
or
Pulse
.
Set the redial options
If the printer was unable to send a fax because the receiving fax machine did not answer or was busy, the
printer attempts to redial based on the settings for the redial options. Use the following procedure to turn
the options on or off.
54
Chapter 5 Fax
ENWW