Internal Storage
Devices
One of the following
depending on Model
Optical Drives
Optional SATA 9.5mm DVD-ROM Optical Drive
NOTE:
Optical is optional in entry, base and performance BTO models.
Optional SATA 9.5mm DVD RW Optical Drive
Hard Drives
None ship standard
Hard Drive Bays
(8) Hot plug SFF SAS/SATA HDD bays; upgradable to (48)
(8) Hot Plug LFF SAS/SATA HDD Bays; upgradable to (24)
NOTE:
All Pre-configured Models come populated with some hard drive
blanks installed. Should the customer need additional hard drive blanks,
they can order more using either P/N 666987-B21: HP SFF HDD Blank
Kit or P/N 666986-B21: HP LFF HDD Blank Kit. These part numbers for
single HDD blanks below are also provided should the customer require
replacement HDD blanks for their server.
Maximum Internal
Storage
One of the following
depending on Model
CAPACITY
CONFIGURATION
Hot Plug LFF SAS
144TB
24 x 6TB
Hot Plug LFF SATA
144TB
24 x 6TB
Hot Plug SFF SAS
48TB
48 x 1TB
Hot Plug SFF SATA
57.6TB
48 x 1.2TB
Hot Plug SFF SATA SSD
76.8TB
48 x 1.6TB
Hot Plug SFF SAS SSD
76.8TB
48 x 1.6TB
Hot Plug LFF SATA SSD
38.4TB
24 x 1.6TB
Power Supply
One of the following
depending on Model
HP 500W Flex Slot Platinum Hot Plug Power Supply
HP 800W Flex Slot Platinum Hot Plug Power Supply
HP 1400W Flex Slot Platinum Plus Hot Plug Power Supply
HP Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that
allows for hot plug, tool-less installation into HP ProLiant Gen9 Performance Servers. Flex Slot
power supplies are certified for high-efficiency operation and offer multiple power output options,
allowing users to "right-size" a power supply for specific server configurations. This flexibility
helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in
the data center.
All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This
jumper cord is also included with each standard AC power supply option kit. If a different power
cord is required, please check the
ProLiant Power Cables web page
.
To review the power requirements for your selected system, please use the HP Power Advisor
Tool located at
www.hp.com/go/hppoweradvisor
.
Power specifications and technical content for all HP Server power supplies can be found at
www.hp.com/go/proliant/powersupply
.
NOTE:
Mixing of power supplies in the same server is not supported. All power supplies must be
of the same input voltage, output rating, and efficiency rating. If non-matching power supplies are
installed, you may receive an error message and/or experience operational issues with your
server.
QuickSpecs
HP ProLiant ML350 Generation9 (Gen9)
Standard Features
DA - 15035 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 6