8

Connecting the Display

A

B

Connect DVI-D (Digital signal) Cable
Connect D-sub (Analog signal) Cable
Connect VIDEO and AUDIO Cable
Connect HDMI Cable (HDMI1, HDMI2)

1.

Before setting up the monitor, ensure that the power to the monitor, the computer

system, and other attached devices is turned off.  

2.

Connect signal input cable         and power cord        in order, then tighten the screw of

the signal cable.

Connecting with the PC/AV equipment

1

2

Mac adapter:

For Apple Macintosh use, a separate plug adapter

is needed to change the 15 pin high density (3 row) D-sub VGA
connector on the supplied cable to a 15 pin  2 row connector.

When using a D-Sub signal input cable connector for Macintosh 

NOTE

This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.

C

D

Wall-outlet type

Varies according to model

DVI-D (This feature is not available in all countries.)

DVD player or others which have component port

Headphone/Earphone output

PC input

AV equipment 

(Set-Top Box, DVD,
Video,Video Game Console)

* HDMI is optimized on the AV equipment.
* Not supported PC.