ON/OFF
When this button is pressed, the
display will shut off and any
programmed guidance will be
canceled. If the display is dark and
the ignition is On, pressing “On/Off” button turns on the display and the
Start Menu screen is shown.
SWITCHING ON/OFF
The navigation system can only navigate when the ignition switch is in
the ON or ACC position. Refer to the
Positions of the ignition
section
in the
Driver controls
chapter of your Owner’s guide for more
information.
•
The display first shows a start-up screen that will only be on for a few
seconds. This is followed by:
•
The legal disclaimer screen for usage of the system. Read this
notification and accept by pressing ENTER.
Stand-by mode
If the brightness of the display screen is disturbing, for example by night
or in tunnels, the display can be switched off.
1. CHOOSE “Stand-By” in the Start menu.
•
The display is switched off.
•
You will still hear the guidance advice from the speaker.
2. Press or rotate ENTER or press the “ON/OFF” button to turn on the
display screen.
•
If the navigation system was turned off while in stand-by mode, it will
restart in stand-by mode when the ignition is turned on again.
ON/OFF
Controls
8