Wirless Audo Link
- 3 -
English
- 3 -
Instructions for Use
Control
Connecting MediaVision 3D to the Subwoofer
Coupling MediaVision 3D to the
Subwoofer
A system interface
Wireless Audio-Link
is integrated in your
MediaVision 3D
.
You can use this to connect your
Loewe Subwoofer
to
MediaVision 3D
without
any annoying cables. This connection must be setup once.
➠
The operation of
Wireless Audio-Link
requires a software version
for
MediaVision3D
of version V059 or higher. You can learn more
about updating the software on page 24 of the
MediaVision3D
instructions for use.
➠
The operation of
Wireless Audio-Link
requires a
Loewe Subwoofer
(from art. no. 69211T10/ U10/ W10) or
Subwoofer Compact
with
integrated or retrofitted
Module Wireless Audio Link
.
Move the
Wireless
switch to the
ON
position (
Loewe
Subwoofer
) or move the
Mode
-
ON/AUTO
switch to the
ON
position (
Loewe Subwoofer Compact
).
Use the mains switch to switch the subwoofer to the
ON
position.
Switch
MediaVision3D
on.
Call up the Main Menu.
Select the
Settings
option.
Select the
Audio
option.
Select the
Wireless Speaker
option.
Press
OK
to confirm
.
:
:
:
:
:
:
:
:
:
Audio
Language
Display
Cancel
OK
Pairing of Wireless Speakers
Start pairing with OK. Then you have one mi-
nute to press pairing button at your subwoofer
to confi rm.
Speaker Setup
Dolby PL II
Lock
Network
Others
Select the
On
option.
Press
OK
to confirm
.
Use a sharp object (e.g. paperclip) to confirm within one
minute the
Wireless Pairing
(
Loewe Subwoofer
) button
or the button in the opening between the two switches
Mode Stereo
and
Auto
(
Loewe Subwoofer Compact
).
The pairing takes up to 10 seconds.
A notification will appear if the pairing is successful.
A red message appears in the display of the
MediaVision
3D
when it is in Wireless Audio Link mode.
If the pairing is not successful, switch the units off
and on again after 30 seconds and repeat the above
procedure. Reduce the distance from the subwoofer to
MediaVision 3D
.
➠
Once it is successfully connected, turn each of the three knobs
on the
Loewe Subwoofer
by a quarter turn and specify the desired
settings for the equaliser, the bass intensity and the limiting
frequency. This initialises the correct values to wirelessly operate
the amplifier.
➠
The distance between the subwoofer and audio source must not
exceed 10 m in the same room.
➠
If you wish to toggle between the operating modes Wireless or
Cable via
Audio-Link
, switch the units off for minimum 30 seconds
and then on again.
➠
The rotary knobs
Crossover Frequency
,
Equalizer
and
Bass Inten-
sity
at the
Subwoofer Compact
do not have any function in
Wireless
operating mode. In the Menu of
MediaVision 3D
you can adjust
the sound settings.